Brake Pad Set

The chain of command isn't only a human thing. It also applies to organized working parts like your automotive systems. One good example is the braking assembly. Its operation starts with the brake pedal, where you give out the command, so to speak, by pressing on it with your foot. The pressure created is multiplied up to four times by the brake booster. The master cylinder then transmits the brake fluid to activate the pistons in the calipers, pushing the calipers inwards. The brake pad set, stuffed on the inner side of the calipers, clamps into the brake disc, generating friction that stops or slows down the spinning of the wheels.

The function of the brake pads is basic to stopping your vehicle. Each set includes different numbers of steel-backed plates with friction materials on their surface. Since the pads rub with the rotating steel brake disc, their friction materials are bound to thin over time. So it's important to always check on your auto's brake pad set'both front and rear'to ensure that they haven't reached their minimum thinness limit. But when they already did, replace them immediately to prevent unwanted rotor wear (and untoward incidents, too).

Running with your pads' friction materials thin reduces your auto's braking ability. This also risks your brake discs because each time you press on the pedal, the pads' metal backing is the one scratching the discs, not the friction surface. When further neglected, you're bound to replace both pads and discs.

Featured Brake Pad Set