Pontiac Tempest Clutch Kit
Product Description: SACHS CLUTCH KIT -- 10-3/8 in. OD x 1-1/8 in. ID disc diameter, 10 teeth; Does not include flywheel, clutch alignment tool and pilot bushing; Offers increased torque capacity, endurance....
- 1968-1968: Custom; 8Cyl 6.6L GAS, CARB;
- 1968-1970: Base; 8Cyl 6.6L GAS, CARB;
Product Description: AUTOCOM OE REPLACEMENT CLUTCH KIT -- Manufactured By OE Manufacturers To The Same Rigorous OE Standards, Complete With Pressure Plate, Clutch Disc, Release Bearing, Pilot Bushing, And Alignment Tool, Guaranteed....
- 1970-1970: Base; 6Cyl 4.1L;
Product Description: AC DELCO CLUTCH PRESS AND DRIVEN PLATE KIT -- 10.4 in. x 10T x 1-1/8 in. raised diaphragm, 10 spline; Includes cover; A high quality, direct fit OE replacement plate....
- 1966-1967: Base; 6Cyl 3.8L GAS, CARB;
- 1966-1967: Base; 8Cyl 5.3L GAS, CARB;
- 1966-1967: Custom; 6Cyl 3.8L GAS, CARB;
- 1966-1967: Custom; 8Cyl 5.3L GAS, CARB;
- 1968-1968: Custom; 8Cyl 5.7L GAS, CARB;
Product Description: CENTERFORCE LIGHT METAL DISC AND PRESSURE PLATE SET -- Contains Pressure Plate And Clutch Disc, 10.4 Clutch Diameter, 10 Spline x 1-1/8, Specifically Designed Low Inertia Performance Clutch That Reduces....
- 1968-1968: Custom; 8Cyl 6.6L Gas, CARB;
- 1968-1970: Base; 8Cyl 6.6L Gas, CARB;
Product Description: BECK ARNLEY CLUTCH SET -- A High Quality Replacement Set With OE Form, Fit, And Function
- 1964-1967: Base; 8Cyl 5.3L;
- 1964-1967: Custom; 8Cyl 5.3L;
- 1966-1967: Base; 6Cyl 3.8L;
- 1966-1967: Custom; 6Cyl 3.8L;
- 1968-1969: Base; 6Cyl 4.1L;
Product Description: HAYS PERFORMANCE STREET/STRIP CLUTCH KIT -- 11, 10 Spline By 1.125, Borg And Beck Type, Provides Exceptional Performance, Durability, And Long Term Dependability, Kit Includes Pressure Plate, Disc, Throwout Bearing,....
- 1963-1964: Base; 8Cyl 6.4L;
- 1963-1967: Base; 8Cyl 5.3L;
- 1964-1965: Base; 6Cyl 3.5L;
- 1964-1965: Custom; 6Cyl 3.5L;
- 1964-1967: Custom; 8Cyl 5.3L;
Product Description: ZOOM HP SERIES TOWING/OFF ROAD UPGRADE CLUTCH KIT -- 11 in. disc diameter, 10-spline x 1-1/8 in. input shaft diameter; Sprung hub disc style, raised diaphragm pressure plate style; Includes....
- 1961-1964: Base; 8Cyl 6.4L GAS, CARB;
- 1968-1968: Custom; 8Cyl 6.6L Gas, CARB;
- 1968-1970: Base; 8Cyl 6.6L Gas, CARB;
- 1969-1969: Base; 8Cyl 7.0L Gas, CARB;
- 1969-1969: Custom; 8Cyl 7.0L Gas, CARB;
Other Pontiac Tempest Parts in Stock
- A/C Compressor
- A/C Condenser
- A/C Receiver Drier
- Air Filter
- Alternator
- Axle Assembly
- Ball Joint
- Blower Motor
- Brake Booster
- Brake Caliper
- Brake Disc
- Brake Drum
- Brake Hose
- Brake Master Cylinder
- Brake Pad Set
- Car Cover
- Carburetor
- Catalytic Converter
- Clutch Disc
- Clutch Kit
- Control Arm
- Control Arm Bushing Kit
- Cylinder Head Gasket
- Distributor Cap
- Distributor Rotor
- EGR Valve
- Engine Gasket Set
- Engine Mount
- Exhaust Gasket
- Exhaust System
- Fan Clutch
- Floor Mats
- Flywheel
- Fuel Filter
- Fuel Pressure Regulator
- Fuel Pump
- Fuel Tank
- Heater Core
- Idler Arm
- Ignition Coil
- Ignition Lock Cylinder
- Ignition Switch
- Ignition Wire Set
- Knock Sensor
- Muffler
- Oil Filter



Family Car Parts Store




